Comments for Much Ado About Everything

Comment on Sharp LC-46D62U Firmware Update by Darian

Darian — Thu, 24 Nov 2011 10:38:11 +0000

If you get an error on a lcd-like tv that behaves like this:
Doesn’t turn on (flashing power LED.).

-> Be sure your tv is out of warranty.

You’ll probably have to open the tv and replace some capacitors.
Normally broken capacitors will pop open, but not always.
You can replace capacitors of the same value (Farad) to capacitors with a higher capable voltage, this would mostly have been the problem (too low voltage capability.).

!! Watch out for the High Voltage board (with large capacitors.). There could still be a charge left in there. If you really have to replace those capacitors, you would wanna discharge them with a large screw (flat top) screwdriver. !!

Comment on Sharp LC-46D62U Firmware Update by Daniel Namorado

Daniel Namorado — Sun, 13 Nov 2011 05:05:24 +0000

Hi i need the Firmware for LC32D62U please help me for get i need for upgrade my TV

Comment on Netbeans Tools –> Options Dialog Does not Show by Davor

Davor — Thu, 03 Nov 2011 15:53:06 +0000

Thanks very much man!

Comment on Netbeans Tools –> Options Dialog Does not Show by gokmev

gokmev — Sun, 16 Oct 2011 23:27:54 +0000

It fixed my problem in NB 7.0.1. Cheers.

Comment on Netbeans Tools –> Options Dialog Does not Show by johnj

johnj — Thu, 13 Oct 2011 16:26:48 +0000

awesome. this helped. Worked in version 7. Although you didn’t explicitly say it, these directions are for WINDOWS. ^_^

Comment on Netbeans Tools –> Options Dialog Does not Show by Harry

Harry — Wed, 22 Jun 2011 23:26:34 +0000

Can confirm this fixed my problem with netbeans versions 6.9.1 and 7.0. I run a dual screen setup, and had a hunch this was the problem as well, however couldn’t find anyway to fix it or grab the window outside my desktop area.
Thanks for the fix!

Comment on Netbeans Tools –> Options Dialog Does not Show by Virgile

Virgile — Wed, 18 May 2011 19:52:30 +0000

thank you so much, I was stuck on this one. Works with netbeans7 too and is indeed related to dual monitor: the file contains the line OptionsX=-1100 beacause the option dialog was lastly displayed on the second monitor at work while i am now trying to open it on the primary monitor of my portable here at home. Tx +++

Comment on Netbeans Tools –> Options Dialog Does not Show by kszkaresz

kszkaresz — Thu, 14 Apr 2011 19:46:34 +0000

Thanks a lot! I had the same problem, and your advice helped me!
P.S: you surely wanted to write ’6.9′ in the first line
// sorry for my english

Comment on Video Encoding on a Quad Core – mp4, h264, meGUI, Linux, ffmpeg – Part 2 by sbrbot

sbrbot — Sat, 02 Apr 2011 17:53:03 +0000

additionally to some statements in this article today mencoder and ffmpeg know how to exploit multithreading

Comment on Netbeans Tools –> Options Dialog Does not Show by Rob

Rob — Thu, 24 Mar 2011 02:38:53 +0000

I think your hunch is correct. I go between dual monitors and single-screen when I take my work laptop home, and that seemed to cause the issue for me.

Thanks for the fix! (It worked perfectly.)